Stryker Laparoscopy Tower
Stryker Laparoscopy Tower
All product and company names are trademarks of their respective holders. Use of them does not imply any affiliation with or endorsement or sponsorship by them.
Details
The versatile Stryker Laparoscopy Tower provides visualization and documentation of procedures. It also gives you capacity for arthroscopy and other rigid endoscopy procedures.
Available With
- Stryker SDC Pro 2 DVD — With the SDC Pro 2 DVD, you get sophisticated digital documentation that is easy to use and state of the art. The SDC Pro 2 stores PCcompatible, high quality digital images and videos, and integrates seamlessly into the normal operating room work flow. It features a computer-based unit with a touchscreen, an infrared hand-held remote control and a camera button interface.
- Stryker 988 3 CHIP Digital Camera — The standard for capturing crystal clear digital video. Features a range digital and analog outputs.
- Stryker X-6000 Light Source — The high performance X-6000 integrates with Stryker Endoscopy medical video cameras and dependably illuminates the surgical site across every endoscopic application. Using proper light table and adapters, you can connect it to any rigid or flexible endoscope.
- Also includes a Stryker 30L Insufflator, mobile cart and your choice of a flat screen or tube-based monitor!
Specifications
Stryker Endoscopy SDC Pro 2 DVD
- System Type: Real time, MPEG 1 or 2 compression engine with full IBP encoding
- Video Inputs: S-Video, Composite, SDI; DVI & XGA (DVD system only)
- Video Outputs: S-Video, Composite, SDI; DVI & XGA (DVD system only)
- Audio Input: Stereo
- Resolution: 1024 × 768 or 640 × 480 (with HiRes OFF)
- Image Enhancement: Real time adjustment of Hue, Brightness, Contrast, Saturation, and Save as JPEG.
- Disc Save Time: Less than 10 minutes for one full disc
- Disc Capacity: 60 images / Video files, up to a maximum of 1.8GB (CD system) and 4.5GB (DVD system)
- File Format: Standard BMP file, ISO standardized MPEG-1 file, MPEG-2, JPEG (non-progressive, 1:1:1 no sub-sampling)
- CD Recording: Multisession ISO9660 with Joliet extensions
- DVD+RW: ISO UDF Video for DVD Video
- Remote Control: Wireless Infrared, Camera Head Triggering
- Power Consumption: 45W, 100V - 240V at 2A maximum, leakage less than 300micro Amp
- Agency Approval: UL 2601-1, 2nd Edition; CAN/CSA C22.2 No.601.1-M90; IEC 601-1-2
- Size (control unit): 5.14" H × 16.6" D × 15.9" W
- Shipping Weight (full assembly): 37 lbs.
- Network: 10/100 Mbps ethernet
- Auto Printing: 1/2/4/6/8/12/18 images per page
- Display: 8" TFT LCD, with digital touch screen
- Type B Equipment
- NTSC/PAL
- Specialties: General Surgery, Orthopedic, GYN, Cardio-thoracic, Urology, ENT, other
Stryker Endoscopy 988 3 CHIP Digital Camera
- Imaging System: 1/3" Interline Transfer, EX view HAD CCD 752 (H) × 582 (V) pixels
- Video Outputs:
- Composite: PAL standard, 1.0V P-P into 75 Ohms
- Connector: BNC Coaxial
- Component: S-VHS, Y-1.0V P-P C-0.29
- Connector: 4-Pin VHS
- Component: RGB (or Y, B-Y, R-Y), 1.0V P-P into 75 Ohms
- Connector: 8-Pin DIN
- Digital Visual Interface: (DVI) Digital 1024 × 768 XGA resolution, 29-Pin DVI-I
- Serial Digital Interface: Digital SMPTE-259M BNC coaxial XGA analog
- Dimensions:
- Camera control Unit: 9.8" / 24.8 cm (w) × 4.0" / 10.1 cm (h) × 15" / 38.1 cm (d)
- Camera head to camera control unit 10' / 3 m sealed cable or 21.3' / 6.5 m sealed cable (sensed by CCU)
- Enhancement: Switchable to 8 steps
- Cable connector: Super lemo gold pin connectors
- Resolution: 950 lines
- Signal to noise ration: 72 dB
- Mounting: C-mount/standard
- Minimum illumination:
- Auto Shutter Range: 1/50 - 1/50000
- Gain: 4 levels / 0 - 15 dB
- Power consumption: Approx. 30 W
- Input voltage range: 230 ± 10 VAC 50/60 Hz
- Total shipping weight: 13 lbs. (5.9 kg)
Stryker Endoscopy X6000 Light Source
- Electrical:
- Primary 100 - 240VAC 50/60 Hz 450W
- Fuse 8.0A 250V
- Fiber Optic Cable Range: 2 mm to 11.5 mm outside diameter continuously adjustable
- Dimensions:
- 38.1 cm (w) × 41.4 cm (d) × 14 cm (h)
- 15.0 in. (w) × 16.3 in. (d) × 5.5 in. (h)
- Weight: 10.9 Kg
- Lamp: 300 Watt Xenon Cermax
- Lamp Life: Approximately 500 hours
- Thermal Limit: 85°C/185°F
- Operating Conditions: 5 to 40°C, 10% to 85% Relative Humidity
- Transportation & Storage: 5 to 40°C, 10% to 85% Relative Humidity, 700hPa to 1060hPa
- Classifications & Approvals:
- Complies with IEC 601-1 with Amendments 1 & 2, CSA Std., C22.2 No. 601.1-M90, and UL2601-1.
- Complies with EN 60601-1-2: 1993 (EMC Compliance of Medical Devices)
- Class 1 Equipment
- Type CF applied parts
- Patent Protection: U.S. #5,850,496 and 6,110,107. Other patents pending
Stryker 30L Insufflator
- Power Supply: 100 V~ / 110 V~; Mains fuse T 3.15 A; USA 3.5 A (slow blow), UL listed; Mains fuse T 1.6 A; Connection for potential equalization
- Frequency: 50 - 60 Hz
- Power Consumption: 85 W
- Max. Current: 100 V: 710 mA; 110 V: 620 mA; 240 V: 310 mA
- Protection Class: Class I, Type BF
- Dimensions: 360 mm (w) × 150 mm (h) × 300 mm (d)
- Weight: Approx. 12.5 kkg (without glass cylinder)
- Insufflation Medium: Medical CO2
- Maximum Output Pressure: 55 mm Hg
- Maximum Gas Supply Pressure: 80 bar / 1160 PSI
- Minimum Gas Supply Pressure:
- 5 bar / 73 PSI (CO2 gas cylinder)
- 5 bar / 73 PSI (CO2 house-controlled gas supply by using the central gas supply connection)
- Measurement Range of Gas Supply: 0 - 50 bar / 0-725 PSI
- Gas Flow Range: 0 - 30 l / min
- Pressure Range: 1 - 30 mm Hg
- Accuracy of Pressure Measurement: ±5%
- Accuracy of Gas Flow Measurement: ±5%
- Accuracy of Volume Measurement: ±10%
- Accuracy of Gas Supply Measurement: ±10%
- Connections (optional):
- RS232-serial port
- S-VHS IN/OUT
- Video IN/OUT
- Operation Directions: 10 - 40° C / 50 - 104° F / 30 - 75% rel. air humidity
- Storage/Transportation Directions:
- -40 to +70°C / -40 to +159°F
- 10 - 100% rel. air humidity
- Manufactured and Tested Acc. To: EN 60601-1 / IEC 601-1
- EMC: EN 60601-1-2 / IEC 601-1-2
