Hospira Plum A+ Infusion Pump
Hospira Plum A+ Infusion Pump
Términos y Condiciones del Listado
All product and company names are trademarks of their respective holders. Use of them does not imply any affiliation with or endorsement or sponsorship by them.
Details
The Hospira Plum A+ Infusion System ( previously known as the Abbott brand ) is a stationary multi-channel pump with software and display features that have been designed to reduce drug administration errors and help promote safe and on-time delivery of medications. Launched in 2000, the Plum A+ calculates drug-appropriate doses, displays key programming information and provides a pre-infusion review of programmed medication infusion parameters for clinician confirmation. This product is also marketed under the brand name Hospira. In 2004, Hospira emerged as a spin off company of Abbott Laboratories.
Specifications
General
- Physical Dimensions: 8" (H) × 8" (W) × 6" (D), excluding pole clamp
- Weight: 9.5 lbs. with battery
- Casing: High-impact plastic
- Delivery Rate Range
- Lines A & B:
- 0.1-99.9 ml/hr in 0.1 ml increments
- 100-999 ml/hr in 1 ml increments
- Concurrent Delivery: 0.5 ml/hr minimum for each line
- PlumSet: 500 ml/hr cumulative (A+B) maximum
- KVO: 1.0 ml/hr or the last primary delivery rate, whichever is less
- VTBI Range:
- 0.1-99.9 ml in 0.1 ml increments
- 100-9999 ml in 1 ml increments
- Electrical Power Requirements: 120V, 50-60 Hz, 35VA
- Fuses: F1, F2, 250V, 0.5A
- Power Cord: Hospital Grade AC Cord 10 ft long
- Battery: One sealed lead acid, rechargeable 6V battery, internal
- Battery Life: With a new fully charged battery, the infuser shall operate for a minimum of 6 hours at 125 ml/hr or less, or deliver 500 ml at 126 ml/hr or greater on one line
- Recharge: The battery charges whenever the pump is connected to AC power. The recharge time is approximately 6 hours with the device operating at 125 ml/hr on one line
