Maxtec MaxVenturi Oxygen Blender
Maxtec MaxVenturi Oxygen Blender
0 Artículo está en su carrito Ver carrito ahora
Términos y Condiciones del Listado
All product and company names are trademarks of their respective holders. Use of them does not imply any affiliation with or endorsement or sponsorship by them.
Details
Perfect solution for adult, high-flow oxygen therapy in almost any environment
The Maxtec MaxVenturi is specifically designed to interface with high-flow humidification systems, allowing users to mix ambient air and oxygen without the need for piped-in, medical-grade air. The Maxtec MaxVenturi is available from Avante Health Solutions. For more information, contact your Avante representative today.
Features
- Specifically designed to interface with high-flow humidification systems.
- All-in-one oxygen/air mixer, O2 analyzer and flow meter.
- Allows operators to mix ambient air and oxygen without the need for piped-in medical grade air.
- Updated capabilities:
- High-flow therapy for trach patients.
- Compatibility with common aerosol masks.
- O2 Analyzer displays accurate O2 measurements with simple, one-touch calibration and on/off operation.
- Approximately 5,000 hours of battery life on analyzer.
- Mixed gas outlet for high-flow system interface.
- Room air inlet eliminates the need for piped medical air.
- MaxVenturi Muffler (optional) can reduce noise up to 5 times.
- Mixed gas outlet for high-flow system interface.
- Flow control knobs independently adjust O2 and air control valves.
- Built-in pole mount for easy transport and storage.
- Optional accessories: MAX-250E, Venturi Muffler, Coiled O2 Hose — ask your Avante representative for availability information.
Specifications
Dimensions
- Dimensions: 7.3 in x 6.6 in x 5.3 in (185 mm x 167 mm x 135 mm)
- Weight: 2.54 lbs (1152 grams)
Performance
- Measurement Range: 0 to 100%
- Display Resolution: 0.10%
- Accuracy & Linearity: 1% of full scale at constant temperature, relative humidity, and pressure when calibrated at full-scale
- Total Accuracy: ±3% actual oxygen level over full operating temperature range
- Response Time: 90% of final value in approximately 15 seconds at 23ËšC
- Warm-up Time: None required
- Operating Temperature: 15 ËšC to 40 ËšC (59 ËšF to 104 ËšF)
- Storage Temperature: -15 ËšC to 50 ËšC (5 ËšF to 122 ËšF)
- Atmospheric Pressure: 800 to 1013 mBars
- Humidity: 0 to 95% (non-condensing)
- Power Requirements: Two (2) AA alkaline batteries (2 x 1.5 volts)
- Battery Life: Approximately 5,000 hours with continuous use
- Low Battery Indication: Battery icon displayed on LCD
- Sensor Type: Maxtec MAX-250 Series galvanic fuel cell
- Expected Sensor Life: MAX-250E > 1,500,000 O2 percent hours minimum (around two years with standard medical usage)
- Drift of measurement: < +/-1% of full scale at constant temperature, pressure, and humidity
