Abbott Plum XL Infusion Pump
Abbott Plum XL Infusion Pump
0 item is in your cart. View cart now
All product and company names are trademarks of their respective holders. Use of them does not imply any affiliation with or endorsement or sponsorship by them.
Details
The Abbott Plum XL is a dual-line volumetric infusion pump that provides primary, secondary, and piggyback options. This device has a wide range of capabilities from home care applications to critical care.
Features
- The pump runs from 1mL/hr up to 999mL/hr, and runs a 1mL/hr KVO at dose end.
- The Abbott Plum XL IV pump is capable of running parenteral (blood) and non-parenteral (enteral) fluids, and may use standard fullfill, partfill, syringe, and vial containers
Delivery Rate Range
- Primary, Secondary Mode: 1 to 999 ml/hr (in 1 ml increments)
- Weight 375 g (without batteries and PBlade)
- KVO: 1 ml/hr
- Dose Limit Range: 1 to 9999 ml/hr (in 1 ml increments)
- Occlusion Range: 10 psig (+5, -2 psig)
Specifications
General
- Dimensions: Approximately 8.25H × 7.5W × 8.75D inches (including pole clamp)
- Weight: Approximately 7.75 lbs (with battery)
- Casing: High-impact plastic
- Battery: Sealed lead-acid rechargeable 8 V battery, internal to infusion system. Accessible for ease of field replacement, with color-coded leads and polarized connector
- Power Requirements: 100-130 VAC, 50 to 60 Hz, less than 35 W
- Power Cord: Hospital-grade AC cord, 10 feet long, with transparent plug
- Fuses: 0.5 A, 250V, slow-blow
- Battery: Sealed lead-acid rechargeable 8 V battery, internal to infusion system. Accessible for ease of field replacement, with color-coded leads and polarized connector
- Battery Operation: A fully-charged new battery will provide eight hours of operation at 125 ml/ hr. A full recharge takes approximately 16 hours. If the infusion system is turned to OFF/CHARGE, recharge takes approximately eight hours.
