DRE Signal NIBP & Pulse Oximetry Monitor
DRE Signal NIBP & Pulse Oximetry Monitor
All product and company names are trademarks of their respective holders. Use of them does not imply any affiliation with or endorsement or sponsorship by them.
Details
Features
- High resolution 6.5" (diagonally) monochrome LCD display
- 24 hours data storage facility in graphical mode with zoom facility and separate tabular trend for 100 NIBP readings
- NIBP with three modes: Manual, Automatic, STAT
- Graded and color coded audio/visual alarms
- Alarm recall facility to view last 16 critical alarms (patient related)
- Rechargeable battery backup
- External battery jack (12V) for car battery – Transport application
- Can be used as transport and ambulatory monitor
- Suitable for neonate, pediatric, and adult applications
- Optional Printer
Specifications
Physical Weight & Dimensions
- Height: 8.7 in (22 cm)
- Width: 5.7 in (14.5 cm)
- Depth: 7.3 in (18.5 cm)
- Weight: 7.7 lbs (3.5 kg) with in-built battery and recorder
Power Supply
- Universal power supply: 95-265V AC, 50 / 60 Hz
- Power ratings: 40 Watt
- Battery type: 14.8V, 14.4Ah (Li-ION)
- Operating time: 4 hours on fully charged battery (with full load & NIBP auto mode 2 mins. interval & recorder on for 2 mins.)
- Charging time: 100% charge in 6 hr. for fully discharged battery
- External Battery: 12V DC input
Non-Invasive Blood Pressure
Oscillometric Principle, Display of Systolic, Diastolic and Mean pressure
- Modes: Manual, STAT (5min continuous), Automatic (interval 2 min. to 90 min.)
- Range: 20 to 255mmHg
- Auto Zero: Zero Pressure Reference is automatically established after every reading
- Cuffs: Quick Connect/Disconnect
- Safety Features: Automatic deflation if pressure exceeds 300 mmHg for adult and 150 mmHg for neonate – Measurement time exceeds 180 seconds (adult) 90 seconds (neonate) – microprocessor failure.
- Alarm Limits: Selectable for Systolic and Diastolic
- Range: 20-250+mmHg
- Accuracy: ±3 mmHg
Pulse Oximetry
Pitch variation with change in oxygen saturation.
- SpO2 range: 0 - 100%
- Display of pulse strength, plethysmograph, PR and SpO2 values. Display of perfusion on bar graph
- Accuracy: 100 to 70 % (± 2 digits ), 69 to 50 % (± 3 digits ), 49 to 0 % (unspecified) Accuracy in neonatal monitoring 100 to 70% (± 3 digits)
- Modes: Normal and Fast Response
- Alarms: Low 50-95% - High 55-100%
Alarms
Alarm setting for all parameters.
- Patient alarm: RED flashing with audio and message indicator
- Equipment alarm: YELLOW flashing with audio and message indicator. Alarm auto-set facility provided Auto setting of alarm for PR and SpO2.
- Manual settings: Systolic and Diastolic
- Alarm Recall: Last 16 critical alarms with time and date Volume control: 4 levels of volume Trends 24 hr. of Graphical and Tabular trend for HR/PR, SpO2
- NIBP trend: Last 100 readings (tabular)
- Alarm Recall: Last 16 alarm events with date, time and message. 2hr. zoom for graphical trends with mark, record and print facility.
- Time Scale: 12 Hr. (resolution of 3 min) and 2 hr (resolution 30 Sec) for graphical trend Recording Optional in-built dual channel thermal recorder for recording two waveforms (selectable) with numerical data and alarm status. NIBP and tabular trend recording with patient information. Direct / Delayed / Continuous modes of recording. Record On Alarm facility (selectable)
- Speed: 25 mm/sec or 50 mm/sec
Display
- Resolution: 640 x 480 pixels
- Type: Color
- Size: 6.4 inches
Back Panel
- VGA output
- Mains power on/Off
- RS-232 Output
- Ground Connection
- External Printer Port
Trace Speed
12.5, 25 or 50mm/sec
