DRE Ventura CS2 Anesthesia System
DRE Ventura CS2 Anesthesia System
Biomedical HTM Customers
Service, Repair & Parts
All product and company names are trademarks of their respective holders. Use of them does not imply any affiliation with or endorsement or sponsorship by them.
Details
Modern anesthesia delivery at an affordable price.
The DRE Ventura CS2 is an anesthesia machine featuring a touchscreen ventilator with advanced ventilation parameters. Featuring a pull-out writing shelf, an integrated oxygen monitor, an autoclavable absorber and locking drawers for added security.
Features
- Integrated touch-screen display.
- Bright illuminated display.
- Adult, pediatric and neonatal modes.
- State of the art ergonomic design.
- Constructed of high quality American and European materials.
- CO2 absorber is autoclavable (excluding the manometer).
- In the off mode, you can remove and refill the absorber canister without losing fresh gas.
- Two/three gas machine with a two-station Selectatec® backbar with up to four cylinder yokes.
- The oxygen flush is mounted next to the common gas outlet and is recessed for safety.
- Both sides of the machine incorporate the GCX™-style tee-slot for mounting ventilators, monitors and other ancillary equipment.
- Advanced ventilation parameters: Pressure control ventilation (PCV), Pressure support ventilation (PSV), Volume control ventilation, SIMV, SMMV, Auto-peep
Specifications
General
- Overall dimensions: 130 cm (H) × 72.7 cm (W) × 66.7 cm (D)
- Weight: 110 kg
- Top shelf dimensions: 60.5 cm (W) × 35 cm (D
- Maximum top shelf loading: 35 kg
- Work surface dimensions: 60.5 cm (W) × 35.0 cm (D)
- Work surface height: 81.5 cm
- Drawer unit dimensions (internal): 3 drawers: 48.2 cm (W) × 31.8 cm (D)
- Maximum drawer loading: 35 kg
- Writing Tablet dimensions: 35.3 cm (W) × 30.0 cm (D)
- Casters: 125 mm (front wheels braked)
- Vertical dovetail mounting system: Three on each side of machine
Vertical Tee Slot Mounting System (GCX™)
- Tee Slot mounting system is mounted on both sides of the machine.
- Height adjustment: 22.5 cm to 127.5 cm
- Maximum loading: 30 kg
Pneumatic
- Common gas outlet: ISO 22 mm male taper and 15 mm female with 90° swivel.
- Pipeline input: DISS.
- Cylinder yokes: Up to four.
- Oxygen failure device: Nitrous cuts out with low oxygen pressure (air/ oxygen remain).
- Oxygen failure alarm: Whistle sounds prior to nitrous cut out.
- Oxygen and air high pressure DISS outlets: Two maximum available.
Flowmeter
- On/off switch mounted below flowmeter bank: Shrouded.
- Nitrous oxide/air switch: Optional.
- Secondary regulators for flowmeter bank.
- Mechanical anti hypoxic device: Gear driven with minimum 25 % oxygen concentration.
- Oxygen flow range (dual tube): 0 - 1000 ml and 1 - 10 liters.
- Nitrous oxide flow range (dual tube): 0 - 1000 ml and 1 - 10 liters.
- Air flow range (single tube): 0.1 - 10 liters.
Absorber Dimensions
- Height: 34.5 mm
- Width: 30.3 mm
- Depth: 27 mm
- Weight: 9.1 kg
- Mounting system: 25.4 mm (1") diameter hole with clamp screw
- Absorber leak rate: Less than 25 cc fresh gas flow at 30cm H2O
- Canister capacity: 1.4 kg (1600 ml)
- Compatible with most anesthetic machine pole mounting systems.
Absorber
- Quick release manometer: -20 to 100 cm H2O
- Ventilator connection: 22 mm male taper with 15mm female taper
- Swivel Bag Mount Arm: 22 mm male taper with 15 mm female taper
- Patient connections: 22 mm male taper with 15 mm female taper
- Fresh gas inlet: 1 meter hose with 22 mm female taper
- Exhaust taper: 30 mm male
