Masimo Rad 8 Signal Extraction Pulse Oximeter
Masimo Rad 8 Signal Extraction Pulse Oximeter
All product and company names are trademarks of their respective holders. Use of them does not imply any affiliation with or endorsement or sponsorship by them.
Details
Compact design. Unmatched clinical performance.
- Proven accurate during motion and low perfusion in more than 100 independent clinical studies.
- The accuracy of Masimo SET oximetry has been linked to improved care and reduced medical errors.
- Compact, lightweight design with extended battery life for transport applications.
- Large LED color display is easy to read at a distance.
- Ideal for acute and alternate care use; includes configurable Sleep and Home modes.
Features
- Trauma Mode is used to quickly set the unit into the most sensitive mode and fastest averaging time for patients in resuscitation/trauma situations
- Sleep Mode easily configures system to perform bedside studies
- Home Mode allows for safe and accurate monitoring and trending at home
- RadNet and RadLink interface capability for multipatient remote monitoring
- Perfusion Index indicates arterial pulse signal strength and may be used as a diagnostic tool during low perfusion
- Tracks rapid changes in arterial O2 with high fidelity unlike any other pulse oximeter
- Low Signal IQ indicator highlights conditions of low signal quality
- Offers the best probe off detection of Masimo's three sensitivity modes - APOD, Normal and MAX sensitivity
- Adjustable averaging 2 to 16 seconds
- Nurse call interface
- Over 8 hours of internal battery life when fully charged
- 72 hours of trending memory
- Available in horizontal and vertical configurations
- Compatible with Philips Vuelink device interface module
Specifications
Physical Weight & Dimensions
- Dimensions: 8.2 × 6.0 × 3.0 inches (20.8 × 15.2 × 7.6 cm)
- Weight: 2.1 lbs (.908 kg; 32 oz)
Measurement Range
- SpO2: 1 - 100%
- Pulse Rate: 25 - 240 beats per minute (bpm)
- Perfusion Index: 0.02% - 20%
Saturation Accuracy
- Saturation: 70% to 100%
- No Motion:
- Adults, Pediatrics: ±2 digits
- Neonate: ±3 digits
- Motion:
- Adults, Pediatrics: ±3 digits
- Neonate: ±3 digits
- Low Perfusion:
- Adults, Pediatrics: ±2 digits
- Neonate: ±3 digits
Pulse Rate Accuracy
- Pulse rate: 25 - 240 bpm
- No Motion: Adults, Pediatrics, Neonate: ±3 digits
- Motion: Adults, Pediatrics, Neonate: ±5 digits
- Low Perfusion: Adults, Pediatrics, Neonate: ±3 digits
- Resolution:
- Saturation (%SpO2): 1%
- Pulse Rate (bpm): 1 bpm
Electrical
- AC Power requirements: 100-240 VAC, 47-83 Hz
- Power consumption: 15 VA
Batteries (Handheld)
- Type: Sealed lead acid
- Capacity: 8 hours
- Charging time: 8 hours
Environmental
- Operating Temperature: 41°F to 104°F (5°C to 40°C)
- Storage Temperature: -40°F to 158°F (-40°C to +70°C)
- Operating Humidity / Storage: 5% to 95%, non-condensing
- Operating Altitude: 500 mbar to 1060 mbar pressure -1000 ft to 18,000 ft (-304 m to 5,486 m)
Modes
- Averaging mode: 2, 4, 8,10,12,14 or 16 seconds
- Sensitivity: APOD, Normal and Max
Alarms
- Audible and visual alarms for high and low saturation (1% to 100%), pulse rate (25 - 240 bpm), sensor condition, system failure and low battery.
- Alarm volume 75db min
Display/Indicators
- Data display: %SpO2, pulse rate, alarm status, alarm silenced status, AC power, Signal IQ / pleth bar, perfusion index bar, battery status, no sensor, sensor off
- APOD, Norm, Max, FastSat, Trauma: LED
- Type: LED
Output Interface
- Serial RS-232
- Nurse Call
Compliance
- EMC Compliance: EN60601-1-2, Class B
- Equipment Classification: IEC 60601-1/ UL 60601-1
- Type of Protection: Class 1 (on AC power); Internally powered (on battery power)
- Degree of Protection - Patient Cable: Type BF-Applied part
- Mode of Operation: Continuous
Documents & Resources
