Nellcor N-395 Pulse Oximeter
Nellcor N-395 Pulse Oximeter
All product and company names are trademarks of their respective holders. Use of them does not imply any affiliation with or endorsement or sponsorship by them.
Details
The N-395 is a portable pulse oximeter intended for use as a continuous non-invasive monitor of functional oxygen saturation of arterial hemoglobin (SpO2) and pulse rate. It is intended for adult, pediatric, and neonatal patients. The N-395 is designed for hospitals, outpatient centers, intra-hospital transport, and home care. Hospital use typically covers such areas as general care floors, operating rooms, special procedure areas, intensive and critical care areas, surgicenters, sub-acute centers, special nursing facilities, sleep labs, and more.
Specifications
Measurement Range
- SpO2: 1 - 100%
- Pulse Rate: 20 to 250 beats per minute (bmp)
Accuracy
- Saturation (%SpO2)±1SD):
- Without Motion:
- Adults: 70 - 100% ±2digits
- Neonates: 70 - 100%±3digits
- 1-69% unspecified
- With Motion:
- Adults & Neonates: 70-100%±3digits
- 1-69% unspecified
- Without Motion:
- Pulse Rate:
- Without Motion: 20-250±3digits
- With Motion: Normal physiologic range (e.g., 55-125bpm)±5digits
Electrical
- Instrument:
- Power Requirements: 100-120 VAC, 200-240 VAC, 50/60 Hz, 20 VA switch selectable.
- Fuses: 2 qty, .5 A, 250 volts, slow-blow, IEC (5x20mm)
- Battery: Lead-Acid:
- Battery Capacity: A minimum of 2 hours with a new fully charged battery under the following conditions: no alarms, and no analog or serial output devices attached. A completely discharged battery can be fully recharged in approximately 14 hours while unit is turned off or 18 hours while turned on.
- Charge/discharge cycles: at least 400
- Sensor: The wavelength range of the light emitted is within the range of 250 nm to 1,000 nm with the energy not exceeding 10nw.
