Respironics BiPap Vision Ventilatory Support System
Respironics BiPap Vision Ventilatory Support System
0 item is in your cart. View cart now
All product and company names are trademarks of their respective holders. Use of them does not imply any affiliation with or endorsement or sponsorship by them.
Details
Accurate, Reliable, and Easily Upgradeable Ventilatory Support System
Features
Integrated Display Screen
Integrated Display Screen displays easy-to-read real time graphics in waveform or bar scale format, providing the following measured and calculated numerical values to assist with ventilator management:
- IPAP
- Total Breath Rate
- Exhaled Minute Ventilation
- % Patient Triggered Breaths
- Exhaled Tidal Volume
- EPAP
- Ti/Tot
- Peak Inspiratory Pressure
- Patient or Total Leak
Modes
- CPAP and S/T are available for maintaining airway patency and providing pressure support ventilation.
- PAV * /T (Proportional Assist Ventilation/Timed mode) helps to promote improved patient comfort and enhanced patient/ventilator synchrony through independent adjustment of Volume and Flow assist based on the patients disease state.
Oxygen Control up to 100%
Allows you to blend oxygen within the unit in concentrations ranging between 21-100% without auxiliary oxygen tubing attached to the mask.
Pressure Regulation at the Mask
Pressure regulation at the mask allows you to regulate pressure therapy to assure delivery where it counts (not inside the machine), and automatically adjusts for variations.
Upgradeable Design Provides Flexibility
Upgradeable features provide flexibility in your purchase decision, now and in the future. The Vision System gives you the ability to upgrade instead of buying a new machine for each medical revolution.
BiPAP® Auto-Trak Sensitivity™
Optimum Response Automatically. The innovative development ofAuto-TrakSensitivityTM enables the BiPAP Vision System to automatically respond to changing breathing patterns and circuit leaks by identifying leaks and adjusting variable sensitivity thresholds for optimum response with every breath.
Specifications
Control Ranges and Increments: Parameters
| Parameters | Control Range | Control Increment |
|---|---|---|
| IPAP | 4 to 40 cm H2O | 1 cm H2O |
| EPAP | 4 to 20 cm H2O | 1 cm H2O |
| CPAP | 4 to 20 cm H2O | 1 cm H2O |
| Rate | 4 to 40 BPM | 1 BPM |
| Timed Inspiration | 0.5 to 3.0 sec | 0.1 sec |
| IPAP >Rise Time | 0.05 to 0.40 sec | 4 set points: .05, .1, .2, .4 sec |
| Oxygen Concentration (%O2)* | 21 to 100% | 4% from 21 to 25% 5% from 25 to 100% |
*With optional Oxygen Module
Control Ranges and Increments: Alarms
| Alarm | Control Range | Control Increment |
|---|---|---|
| High Pressure | 5 to 50 cm H2O | 1 cm H2O |
| Low Pressure | Disabled;0 to 40 cm H2O | 1 cm H2O |
| Low Pressure | Delay 0 to 60 sec | 1 sec |
| Apnea | Disabled; 20 to 40 sec | 4 set points: Disabled, 20, 30, 40 sec |
| Low Minute Ventilation | Disabled; 1 to 99 L/min | 1 L/min |
| High Rate | 4 to 120 BPM | 1 BPM |
| Low Rate | 4 to 120 BPM | 1 BPM |
Display Ranges and Increments
| Parameters | Control Range | Control Increment |
|---|---|---|
| IPAP | 0 to 50 cm H2O | 1 cm H2O |
| EPAP | 0 to 50 cm H2O | 1 cm H2O |
| CPAP | 0 to 50 cm H2O | 1 cm H2O |
| Rate | 0 to 150 BPM | 1 BPM |
| Exhaled Tidal Volume (VT) | 0 to 4000 ml | 1 ml |
| Minute Ventilation (Min Vent) | 0 to 99 L/min | 1 L/min |
| Total Leak (Tot Leak) | 0 to 300 L/min | 1 L/min |
| Patient Leak(Pt. Leak) | 0 to 300 L/min | 1 L/min |
| Peak Inspiratory Pressure (PIP) | 0 to 50 cm H2O | 1 cm H2O |
| Percent of Patient Triggered Breaths (Pt. Trig) | 0 to 100% | 1% |
| Ti/Ttot | 0 to 100% | 1% |
